During 2012 we experienced an ever increasing demand for an easily installed GRP Low Profile Septic Tank. As a result of this we are delighted to offer our EN12566-1 Tested & Approved Robusta Low Profile range. These tanks have many advantages over and above some of the other products available, please see the following details. In addition to The EN12566-1 Standard these tanks are CE marked for use throughout Europe.

These tanks offer a shallow dig excavation over coming difficult ground conditions which appear to be ever more common place. What ever your Off Mains drainage requirement is, make Synergy your first call. The choice of the Professional Installer!

Synergy Robusta Low Profile Septic Tank

 Synergy Robusta Low Profile Septic Tank.

Made in Gt. Britain, The only GRP Low Profile Septic Tank to have EN12566-1 Certification.

Models: – P4 (To serve Two Bedroom Properties) P9 (To serve up to a single Seven Bedroom Property). P16 (To serve up to 2 x Four Bed + 1 x Three Bedroom Property).

Advantages.

  • British made by Independent family business with 40 years experience.
  • Tested & Approved to EN12566-1:2000/A1:2003.
  • Supplied with Filtered Outlet as standard for higher quality effluent.
  • CE Marked for use throughout Europe.
  • Shallow Dig! Inlet to base dimension only:- P4 = 1150mm P9-P16 =1400mm
  • Supplied with risers pre fitted for 500mm Inlet Invert. (Can be trimmed on site for shallower invert depths).
  • Can be supplied with additional riser shafts for deeper installation if required.
  • Supplied with Holding Down feet as standard.
  • Suitable for Granular Backfill on dry sites.
  • Supplied with 2 x No. Locking Covers & Frames.
  • Galvanised Lifting eyes as standard.
  • Totally smooth internal tank wall for more efficient operation/cleansing.
  • National Delivery.

 Synergy Wastewater Treatment Products
E&OE